Best Watchmaker Lathe-Mill For Sale near CENTRAL AL
All in all, for the watch maker, they offer the perfect setup. Plus, the price is much better than a Swiss machine.
Next they offer two brushless motor options; 750 watt and 1200 watt. I can’t foresee a watchmaker needing over the 750 watt model. In accordance with GlockCNC.com, they can sell you the lathe complete with all their. Firstly, let’s look at the meaty headstock and how it attaches to the lathe. Typically, the OEM Taig lathe uses a really tiny dovetail system for it’s headstock. GlockCNC.com uses a much thicker chuck of aluminum without a”air gap” between the headstock and the bed. This allows for better energy managing from vibration. Next, let’s look at the headstock itself. If you put the OEM headstock right alongside the GlockCNC headstock, you immediately seem the difference. The OEM looks almost wimpy by comparison. The GlockCNC casing has a metal in it and allows for bigger OD bearing. This, in turn, allows for a larger spindle to be utilized. The simple fact of the matter is, that, more spindle mass equals better vibration dampening. Let us talk about those spindles for a watchmakers lathe. This makes perfect sense because those gears are pounding against each other and still need to keep accurate time.
When accuracy of your lathe cuts down, so does everything else. Until now, there weren’t a great deal of options to turn a Taig to a machine much like a excellent lathe. That changed over the last few years. A small company in Michigan known as GlockCNC.com now makes smartly done updates. Two upgrades specifically. First, they’ve made there own heavy duty headstock and spindles. Is this good news for the watchmakers and clockmakers? Their spindle has a OD and they shrink fit the bearings.
For those in CENTRAL, AL They offer ER25, ER32, ER40 as well as the huge ER50 collet chuck spindles. The through hole is from .30″ to .89″, depending upon which ER spindle arbor you select. I would suspect that most watch makers will use the ER25 or ER32. This allows for very precision workpiece. Additionally, the collets are available anywhere. GlockCNC offers .0002″ TIR collets (that is about as accurate as you’ll get). On top of that, they also have adjustable ER nuts to dial out any remaining runout. Needless to say, when you work piece is not straight, then it will make it a challenge to dial out the runout. But, what can be done is make your cut, turn the piece around then use the adjustable nut to dial out the TIR.
Video: watchmaker lathe in CENTRAL